Skip to main content
Nov
16

NTSB unveils new two-year 'Most Wanted' safety recommendations

11/16/2016    

Rail News: Federal Legislation & Regulation

Continue reading

Copyright

© © TradePress Media Group, Inc.

Nov
16

Port of Virginia, Konecranes OK pact for 86 automated stacking cranes

11/16/2016    

Rail News: Intermodal

Continue reading

Copyright

© © TradePress Media Group, Inc.

Nov
16

Railroad equipment update: Surfacing and tamping

Rail News Home MOW November 2016 Rail News: MOW

A Harsco Rail tamper featuring the Callisto geometry system, developed by Harsco subsidiary Protran Technology.Photo – Harsco Rail — Compiled by This email address is being protected from spambots. You need JavaScript enabled to view it., EditorSurfacing and tamping are integral elements of railroads’ maintenance-of-way (MOW) programs. They help railroads boost track stability, and in turn operate more safely and efficiently. And there’s plenty of surfacing work on their MOW plates this year.For example, CN’s project slate includes surfacing 10,500 miles of track, according to Progressive Railroading’s 2016 MOW Spending Report, which was published in the April issue. And CSX planned to surface 3,000 miles and perform out-of-face surfacing on 2,200 miles.A number of regionals and short lines also had surfacing work on their respective 2016 agendas. For example, Alaska Railroad Corp. planned to accomplish ballast surfacing work on about 125 miles spread throughout the railroad’s 466-mile route. Conrail planned to surface 90 miles, Texas Pacifico Transportation Ltd., 120 miles, and Iowa Northern Railway Co., 80 miles. And seven OmniTRAX Inc. short lines — the Alabama Tennessee River Railway; Chicago Rail Link; Georgia and Florida Railway; Illinois Railway; Nebraska, Kansas & Colorado Railway; Kettle Falls International Railway; and Panhandle Northern Railroad — this year planned to surface a combined total of 268 miles of track.What are railroad MOW managers and contractors looking for when it comes to surfacing and tamping equipment? Pretty much what they’re always looking for: cost-effective, user-friendly and reliably productive machines that enable them to complete the work quickly.What follows is a sampling of those machines and, in some instances, the new technology suppliers are incorporating in them. The information was provided by these five suppliers and service providers: Ballast Tools/Ballast Tools Equipment, Harsco Rail, Modern Track Machinery, Nordco Inc. and Plasser American Corp.BTI & BTEBallast Tools (BTI) has been producing surfacing and tamping equipment for 40 years. BTI Xtreme Tungsten Carbide Tamping Tools and BTI T/C Wear-Edges for ballast regulators are designed for long service life and consistent performance “in the toughest ballast conditions,” the company says.BTI manufactures wear-resistant ballast engagement tools for virtually all types and models of tampers, regulators and ballast cleaning (undercutting) equipment. The company also offers custom designs for specialty applications.Ballast Tools Equipment (BTE) incorporates BTI technology into its range of hi-rail MOW construction and maintenance equipment. Building out a line of CAT™ equipment for MOW use, BTE incorporates quick on- and off-track capabilities, and smart-tool attachment recognition and configuration; there’s a complete line of BTE rail-specific attachments for each machine, the company says.The machines are available in a variety of sizes, ranging from smaller skid-steer units to 35-ton excavators. They can be equipped with four- or eight-tool tamping heads, ballast buckets and cribbing attachments, ballast undercutting and culvert cleaning capabilities, and specialized rail tools.For example, the new BTE 318 wheeled-excavator with hi-rail is a “one-machine surfacing system,” the company says — it can undercut, tamp, move and place ballast from on- or off-track positions, then travel quickly by either road or rail to the next work location.Harsco RailHarsco Rail, which offers a range of tampers, continues to incorporate new technology into its equipment development mix.“Automation advances, such as drone technology, are being incorporated into our next-generation tamper, creating a highly productive machine that requires minimal operator interaction,” Harsco says, adding that the machine has yet to be released on the market. “Our goal is to let the operators focus on applying quality corrections and not worry about where the next tie is located.”Harsco subsidiary Protran Technology developed the Callisto geometry system, which is designed to improve quality and production.Modern Track MachineryModern Track Machinery offers the model MB-8AC, a tamping head attachment designed to work off the company’s hi-rail crane.Due to its fully adjustable traversing tamping heads, the unit can tamp tangent track and switches. A remote control located in the crane cab enables the crane operator to “fully perform the entire tamping operation,” the company says. The ballast tines can be used to set the tamping depth.The unit, which enables customers to complete tamping in short track work windows, can operate in line or on adjunct track — then quickly “boom off” to allow quick and easy clearing of the track, the company says. “It is ideal for transits, allowing them to handle or supplement all of their requirements without the expense of a traditional tamper(s),” the company adds. The unit also can be adjusted to several different track gauges, and can be moved quickly and efficiently over the highway so that it’s ready to work once it’s at the location “with a simple coupling to the crane,” the company says.Nordco Inc.In August 2015, Nordco Inc. unveiled the RoadReady™ Surfacing Team. The RoadReady RST-1000 Production Switch Tamper and RBR-1000 Ballast Regulator form a mobile Surfacing Team that individually attaches to over-the-road tractor-trailers for easy transport between job locations.All components lift and fit within the frame to meet height and width requirements for permit-free travel, and can ride at posted highway speed limits, enabling operators to get on and off the track much quicker than with rail-bound surfacing equipment, the company says.The RST-1000 and RBR-1000 are equipped with an integrated turn table that allows the machines to deploy at grade crossings with a clear 30-foot turning radius. The RBR-1000 can go from RoadMode to RailMode in under 10 minutes.Plasser American Corp.TampLink® is Plasser American Corp.’s universal interface to connect different types of Plasser American machines and equipment with a GRM3000T Tamper. The idea: to increase work performance and provide more flexibility. The interface includes all necessary electrical, electronic, hydraulic, pneumatic and mechanical connections. Now, TampLink is included as standard equipment on all of Plasser American’s GRM3000T tampers.Customers can choose between a GRM2X Tamping Trailer, PST16SW Switch/Spot/Chase Tamper or a PTS90C Dynamic Stabilizer to connect to a GRM3000T Tamper to fulfill the ordered work performance without needing to modify the machine/equipment — and without additional operators, the company says. All three machines can be switched out between the same GRM3000T Tamper.The PLC control system automatically detects what type of machine or equipment is connected and sets up the linked machines or equipment accordingly: “You gain the ability to purchase the basic machine/equipment today, and expand the product and service portfolio by purchasing additional equipment later,” the company says.Customers’ existing PTS90C Dynamic Stabilizers and PST16SW tampers can be upgraded with TampLink to work with a GRM3000T. The machines still can be operated as separate units.Email comments or questions to This email address is being protected from spambots. You need JavaScript enabled to view it.
Keywords Browse articles on Surfacing tamping maintenance of way BTI BTE Ballast Tools Harsco Rail Protran Technology Modern Track Machinery Nordco Plasser American Contact Progressive Railroading editorial staff.

Copyright

© © TradePress Media Group, Inc.

Nov
15

Rail supplier updates from ITT, PNC, Nokia, and Kimley-Horn (Nov. 15)

11/15/2016    

Rail News: Supplier Spotlight

Continue reading

Copyright

© © TradePress Media Group, Inc.

Nov
15

Canada's Maloney touts VIA Rail maintenance center improvements

11/15/2016    

Rail News: Passenger Rail

Continue reading

Copyright

© © TradePress Media Group, Inc.

Nov
15

SEPTA begins 'Travel Wallet' fare service

11/15/2016    

Rail News: Rail Industry Trends

Continue reading

Copyright

© © TradePress Media Group, Inc.

Nov
15

Washington state seeks comments on oil-spill response plan

11/15/2016    

Rail News: Safety

Continue reading

Copyright

© © TradePress Media Group, Inc.

Nov
15

Pacific Ethanol and Toledo, Peoria & Western begin unit train service

11/15/2016    

Rail News: Short Lines & Regionals

Continue reading

Copyright

© © TradePress Media Group, Inc.

Nov
15

CN honored for working with Aboriginal communities

11/15/2016    

Rail News: Canadian National Railway - CN

Continue reading

Copyright

© © TradePress Media Group, Inc.

Nov
15

Patriot Rail subsidiary acquires rail tank car, tanker truck cleaning firm

11/15/2016    

Rail News: Short Lines & Regionals

Continue reading

Copyright

© © TradePress Media Group, Inc.

Nov
15

KCS dedicates Texas terminal to Starling

11/15/2016    

Rail News: Kansas City Southern

Continue reading

Copyright

© © TradePress Media Group, Inc.

Nov
15

From the editor: At RSI/CMA, Union Pacific's Lance Fritz accentuated the possible

Rail News Home Union Pacific Railroad November 2016 Rail News: Union Pacific Railroad
— By This email address is being protected from spambots. You need JavaScript enabled to view it., EditorOn Oct. 2-4, the Railway Supply Institute (RSI) and Coordinated Mechanical Associations (CMA) held their 2016 Rail Expo & Technical Conference at CenturyLink Center in Omaha, Neb. The event featured more than 50 educational and technical sessions, and 126 exhibits. It drew nearly 1,300 attendees, according to RSI.
Pat Foran

Given the timing of the event — the third quarter had just ended, summer’s sunnier shades had begun to slip into the grey-golds of fall — talk of turning calendar pages colored a number of the conversations I had, particularly in the exhibit hall.

While some rail-industry suppliers said they’d seen signs of year-end light from Class Is moving grain and auto parts, others told me they’d essentially given up the ghost on the rest of 2016. Instead, they were looking ahead — many optimistically — to what they hoped would be a better 2017.

Continue reading

Copyright

© © TradePress Media Group, Inc.

Nov
14

FTA's Flowers tours St. Louis light-rail projects

11/14/2016    

Rail News: Passenger Rail

Continue reading

Copyright

© © TradePress Media Group, Inc.

Nov
14

California rail authority inks broadband pact for high-speed corridor

11/14/2016    

Rail News: Internet-Digital

Continue reading

Copyright

© © TradePress Media Group, Inc.

Nov
14

KCS, KCSM host Mexico energy symposium

11/14/2016    

Rail News: Kansas City Southern

Continue reading

Copyright

© © TradePress Media Group, Inc.

Nov
14

Honolulu transit agency names King chair

11/14/2016    

Rail News: People

Continue reading

Copyright

© © TradePress Media Group, Inc.

Nov
14

ASLRRA to seek tax credit, balanced regs under new administration, Congress

11/14/2016    

Rail News: Short Lines & Regionals

Continue reading

Copyright

© © TradePress Media Group, Inc.

Nov
14

Railroad Innovator Award: As CEO, Claude Mongeau helped bolster CN's supply chain relationships

Rail News Home Canadian National Railway - CN November 2016 Rail News: Canadian National Railway - CN

— By This email address is being protected from spambots. You need JavaScript enabled to view it., Associate EditorSupply chain collaboration was one of the hallmarks of Claude Mongeau's more-than-six-year stint as president and chief executive officer of CN. Under his direction, the railroad placed a strong focus on improving relationships with supply chain partners to boost overall efficiency.With Mongeau at the helm, CN also invested in the railroad for the long term in order to "raise the bar on efficiency and customer service," as he put it earlier this year. In all, Mongeau's efforts helped transform CN into a more customer-friendly organization while still maintaining the railroad’s high levels of operational execution."The supply chain focus is a natural evolution from where CN has been," Mongeau told Progressive Railroading in 2011.CN certainly evolved under Mongeau’s watch. In first-quarter 2016, the Class I reported an operating ratio of 58.9, an improvement of more than 10 points from 1Q 2011. At the same time, first-quarter revenue totaled nearly 3 billion Canadian dollars, up from CA$2 billion in the same quarter in 2011.In June, Mongeau stepped down from his post for health reasons, but his impact is still being felt. And it'll continue to be."[Mongeau] has been instrumental in helping us raise our game by evolving our strategic agenda to one of operational and service excellence while positioning CN as a true supply chain enabler," said Luc Jobin, CN's current president and CEO, during a second-quarter earnings call. "That agenda still resonates today with our customers and helps us gain traction in the marketplace even in difficult economic circumstances."Mongeau joined CN in 1994 shortly before the formerly government-operated railroad became privatized. He then helped the Class I navigate a series of acquisitions, including the Illinois Central Corp., the Joliet and Eastern Railway Co. and Wisconsin Central Ltd. He was named executive vice president and chief financial officer in 2000. Mongeau took the top leadership post in 2010.To honor his accomplishments during his more than two decades at CN, Progressive Railroading and RailTrends® in May named Mongeau the 2016 recipient of the Railroad Innovator Award, which recognizes an individual's outstanding achievements in the rail industry. Mongeau will receive the award in person at the RailTrends conference, which will be held Nov. 17-18 at the W New York Hotel in New York City.In the pages that follow, Mongeau reflects on his time at CN, and shares his thoughts on innovation, customer service and the future of railroading.Q: What drew you to the rail industry? And once you got there, what made you want to stay?A: When I came to CN in 1994, I was initially drawn to the company and its rapidly changing prospects for the future. At that time, CN was still a government-owned railway, but the bold new management team, led by Paul M. Tellier and Michael Sabia, was pushing an exciting agenda for change. Being part of that type of historical shift at a corporation attracted me more than any particular interest in the railway industry. Even then I could see the underlying and untapped strength of CN's franchise despite, at the time, its position as a railway industry laggard. I sensed I could contribute to the fundamental transformation Paul and Michael envisioned for CN. I am grateful to have played a leadership role in what proved to be a remarkable transformative journey over the last 22 years, a journey that continues to this day. Coming to CN was absolutely the right decision. I became a proud railroader and have never looked back. I will always wish I could have stayed longer as CN's leader to continue the journey and carry the agenda forward.Q: What would you say are your most important accomplishments over the past two decades?A: From my first day as CEO at CN, I stressed the valuable role teamwork plays in the success of any company. Delivering such a fundamental and historic business transformation at a company as large and complex as CN can only be the result of a true team effort. Throughout my career at CN, I was fortunate to lead great teams on so many important, game-changing initiatives. The last 22 years have been filled with so many achievements of which I am extremely proud, such as:
• CN's sizeable fixed cost-reduction effort in the early phases of restructuring;
• the company's successful privatization;
• completing five value-creating acquisitions to expand our footprint across North America;
• achieving much higher asset utilization levels with our precision railroad model; and
• executing our bold customer-centric agenda to become a true supply-chain enabler and to fully play our role as a backbone of the economy.I believe a culture of solid teamwork combined with a bold and clear vision, a passion to drive change in a positive way and highly disciplined execution were the key drivers of CN's success. I worked hard to embed those values in the culture at CN and in everything I did as the company's leader.Q: What does innovation mean to you, particularly in an industry that isn't often characterized as being a hotbed of innovation?A: I truly believe the railroad industry innovates more than people realize, and certainly more than the industry gets credit for today. For too many people, the railroad may look locked in the same old ways of doing the same old things; but take a closer look at CN, and it is easy to see innovation driving success in all facets of railway operations and at every touchpoint with its customers and stakeholders. CN has transformed itself through innovation and continues to lead the way by striving to find new ways to deploy resources more efficiently and reliably. Adding value for our customers by improving our services, and using technology to do so in a safer and more sustainable way, are the underpinnings of innovation in a mature industry like ours. We've used innovation to lower our carbon footprint, improve efficiency in the supply chain and drive improvements in safety, just to highlight a few. There is still a lot more to do along those lines, but the rail industry is on the right path.Q: What do you think railroads need to do to better serve customers?A: The railroad industry today operates on a solid footing, recovering these last 30 years after decades of decline in the second half of the 20th century. That industry-wide turnaround can be credited to government deregulation, strong investments in infrastructure and equipment, a more consolidated operating structure and sound business innovation. To sustain the recent success, I also believe the industry has to broaden its core efficiency focus to advance a more customer-centric agenda. That means embracing a true supply chain mindset.Our customers need reliable end-to-end transportation services to succeed. Very few goods are delivered in isolation by only one railroad or by one mode. In many instances, more than one railroad with a range of supply chain partners, such as steamships or trucking companies, are involved in safely delivering goods to end markets.I continue to see significant potential for meaningful improvements in service quality through the pursuit of an even more seamless supply chain. That means more supply chain integration, both from an information and execution stand-point. In the last six years, CN has embraced this new mindset to deliver significant benefits, notably through increased customer satisfaction and profitable growth.More industry players need to adopt this mindset and embark on this journey in order to accelerate the potential for positive change throughout key supply chains. It can be done by:
• breaking down silos between supply chain segments;
• leveraging technology to address customer touch points in a more holistic fashion;
• adopting the right service performance mindset; and
• continuing to invest ahead of the curve despite the current uncertain economic environment.I believe these elements are all critical to future success for the railroad industry, its customers and all their supply chain partners.Q: What do you hope your legacy at CN will be?A: I think I'll leave defining a "legacy" to others, but I do know what I hope for CN's future. I know CN will carry forward with the end-to-end supply-chain partnership approach I championed during these last six years leading the company. I also know CN will relentlessly continue to find new ways to innovate and add value for its customers.More than half of our current employees have joined CN during my tenure as CEO, an obvious workforce renewal challenge but one I continue to see as a rare opportunity. I'm confident that with the right customer-centric agenda firmly in place, this new generation of railroaders and leaders will be able to bring a fresh perspective and keep CN positively leading the way in the rail industry for many years to come.Email comments or questions to This email address is being protected from spambots. You need JavaScript enabled to view it.
Keywords Browse articles on Claude Mongeau Mongeau Railroad Innovator Award RailTrends CN Canadian National Class I railroads CN leadership CN executives rail leadership innovation rail innovation Luc Jobin Contact Progressive Railroading editorial staff.

Copyright

© © TradePress Media Group, Inc.

Nov
14

UP recognized for hiring veterans

11/14/2016    

Rail News: Union Pacific Railroad

Continue reading

Copyright

© © TradePress Media Group, Inc.

Nov
14

Metra OKs 2017 budget, logs record ridership for Cubs rally

11/14/2016    

Rail News: Passenger Rail

Continue reading

Copyright

© © TradePress Media Group, Inc.